A wise rancher once said, “Cattle don’t need much – just feed, water and protection.”
You’ve got the feed and the water. If you’ve been thinking of updating the “protection” element for the new babies due this spring, check out some of the options available in this area.
• Stalls made of portable panels
• Available in 12 x 20, 30, 40 and 50 feet
• Panel pens are included for each section (two gates with a divider)
• The 50-foot building contains 5, 10 x 12-foot pens
• Optional 20-foot solid panel wings at each end to funnel cows into the barn and provide a windbreak
• Together the barn and wings offer up to 90 feet of protection
• Optional overhang on the open side
• On 4 x 6-inch rectangular metal skids that are incorporated into the structure, allowing it to be moved easily with a tractor, skid steer or truck
• 15-foot, 8 inches wide by either 40 or 50 feet long
• Includes a 5-foot alleyway in front of the pens, under the roof and enclosed
• 10-foot sliding doors–one in the front and one in the back,forming an alley to put the cows through
• Gates inside the building are 10-foot panels with 5-foot gates
• Optional calving pen with a quarter turn alley like a tub, with a headgate
• Two enclosed sheds can be placed together to create a barn with a 10-foot aisle down the middle.
“We can also custom build special barns to suit someone’s needs. We have a fellow who is doing a dinosaur dig on his ranch, and we created a building just for him. He needed to enclose this particular spot for the winter, where he was digging. It gave him shelter to dig in,” says Martin.
• Smaller ones can be pulled with a pickup, bigger ones require a tractor
• 12 feet wide at the bottom, 16 to 18 feet wide at the top
• 24-foot barns have two or three pens
• 56-foot barn has seven pens
• Pen size is 10 x 12, but is customizable, and can be reconfigured on-site
• Available pulling alley with a head catch and nurse gates
• Two open-front barns can be combined with a peak roof in the middle, creating a barn with stalls down each side and an 8-foot alley down the middle, which can be divided into stalls if needed
• Pricing depends on the size and options. These are some examples
• Custom barns in permanent locations are available
“We can build and design around just about anything,” Blake says.
“Most of our customers want portable barns because they like to be able to change calving pastures. With those, we build everything here; the customer doesn’t have to put anything together. We have trailers we haul them on. If it’s a full calving barn we bolt the sections together after get there.”
Manufactured in Oklahoma, distributing center in Kansas, can be shipped anywhere in the U.S.
• Sizes vary from 12 x 12 to 12 x24
• Stalls are made of portable panels and headgates can be installed
• Dropdown front (to keep out wind and snow)
• Liner panel or back-up bumper for inside the barn, to keep the cows from bumping through the metal sides
• Liner panels available in plywood or steel
• Can combine barns with a breezeway between for a full barn with pens down both sides
• Priced as low as $10.42 per square foot (not including shipping)
Zack Hummel, advertising and public relations specialist
This is a manufacturing company that provides supplies to outlets like FarmTek and ClearSpan Fabric Construction
• Abundance of natural light provides a stress-free, healthy environment for livestock
• Frame made of triple galvanized steel tubing
• White UV-resistant polyethylene cover keeps the building cool in summer and warmer in winter
• Sold without end panels, which can be purchased separately, with roll-up doors
• End frame kits and panels keep out harsh weather, while offering natural ventilation and maximum airflow
• Creates a healthy, comfortable environment that aids in moisture removal, draft control and natural ventilation.
• Super Moo-Tel structure has two heavy-duty steel roll-up doors–one at each end–and two end-frame kits for greater durability and longer life
• Smaller units have a pull rope handle and the larger doors have a chain hoist
• Priced as low as $2.60 per square foot.
Start a dialogue, stay on topic and be civil. If you don't follow the rules, your comment may be deleted.
User Legend: Moderator Trusted User
At first glance, 2022 cattle prices are higher than 2021. At $140, slaughter steer prices are 17.5% above 2021 prices, but even with higher prices, farmers and ranchers will travel a rocky road to profitability,…
Canal Operations position in Firestone/Ft. Lupton area. Job entails delivering water to shareholders throughout growing season on 11 mile long…
Water / Wastewater Department$17.62 per hour or moreWage depending on experience Plus full benefitsClosing date: June 30th 2022 Must be…
Multi-project Operator- Operate excavation equipmentand farm tractors- Repair and install water lines and plumbing for ranch and irrigation water lines-…
Full Time Ranch Hand Position with Housing Provided in Scenic Estes Park, CO. The 2,500-acre ranch, surrounded by Rocky Mountain…
Wanted full time self-motivated ranch managerNeeds to be familiar with customary ranch activitiesWe are a cow/calf & hay producer.Equipment maitience…
Small subcontractor northeast of Denver. Must be able to operate a skidsteer and tractor and have a valid drivers liscense.…
Bigfoot Turf, a family sod farm operation in the Greeley area, has an immediate opening for an experienced Farm Machinery…
Looking for individual with good horsemanship skills, experience with cattle & ability to work in team-oriented environment. Competitive wage/benefit package.…
Family owned and operated ranch in south central South Dakota. We are located 35 miles north east of Valentine, Ne…
Our company is recruiting for a new team member to assist with office and circulation endeavors. This individual will possess…
Day Shift $30.00/hourNight Shift $35.00/hourBased out of Sundance, WYBenefits: Health and 401KEqual Opportunity Employer
A northern Colorado dairy is seeking a full-time employee to maintain and repair an automated robotic milking system. Must have…
Cow calf operation and backgrounding ranch in South Central ND. We are in search of someone with cow/calf experience and…
Need an experienced maintenance technician to join our maintenance team in Sterling!
Mid-sized feedlotLooking for aFeeder/CowboyStarting wage negotiable DOE Opportunity for insurance benefitsLocated in Bush area COcall or email resume to
Diversified Western Nebraska Farm and Ranch seeking motivated long term, full-time employees to join our team. We are a large…
Apprentice or Journeyman Lineman$21.54 to 37.11 per hour DOEPlus Full Benefits Closing date of June 30th, 2022$1,500 moving bonus /…
We need an experienced cowboy/rider to get riding hours in for three horses. It has been several years since the…
Is Accepting Applications for: Licensed Electrician Load Management Technician$38.05 per hour DOEPlus Full Benefits Closing date of June 30th, 2022$1,500…
Our company is recruiting for a new team member to assist with office and circulation endeavors. This individual will possess…
Sat H: 81° L: 53°
Sun H: 72° L: 52°
Mon H: 70° L: 50°
Tue H: 60° L: 46°
Wed H: 70° L: 42°
Do not sell my personal information